4 In. Cyclone Dust Collection Elbows And Couplers Separator Kit For Woodworking Debris Containers, Buckets And Barrels ; Subtotal: $140.30 ; POWERTEC. 4 In.

Some workshops need large dust collection systems with large container to trap the large debris that flows through the dust collection lines. What about the rest of us with our home workshops with smaller dust collection systems? The 4 inch Dust Separator Cyclone Dust Collector Kit steps in quite nicely to fill this void and more. Once setup, the 4 inch Dust Separator Cyclone Dust Collector Kit will do this just like any other premium cyclone system only at a fraction of the cost. With this, comes a bit of a cost to make sure that we are keep dust particles at bay when we are working with wood. When we use our dust collectors with machines like, jointers, planers and even routers those tools tend to produce large chips or shavings that can be very harmful to your dust collectors impeller. The impeller is essentially what draws the dust and debris into the collection unit and into the bag. If large, heavy chips and debris continually hit the impeller, it will eventually wear down and will have to be replaced. Find the Right Container For What You Do... Typically the container size you would use is dictated by the amount of chips you normally produce when using your jointer, router table or planer machines with your dust collector. Most any container will work as long as it has a lid that is firmly secured. These containers also include lids that are secured on by a clamping system which is also recommended for optimum results. Lids and containers are NOT included. Set Up and Installation Considering that to install the 4 inch Dust Separator Cyclone Dust Collector Kit on to a container lid means that we will have to physically cut holes into the lid, the installation may take more than a few minutes. That being said, we have included easy to follow instructions as well as a scale template of the exact hole size to make transferring the pattern to the lid super easy. We have included the following in this kit... 2 each 4 inch top side ports 1 each full color instruction 1 each template for hole cut out 1 pack of nuts and bolts mounting hardware There’s no doubt about it, large cyclone dust collector systems are great! Their value to larger and industrial or commercial workshop settings is immeasurable. What about the rest of us with garage size workshops who don’t want the noise, space consumption or simply the large cost of such a system in their home workshop? The 4” Dust Separator Cyclone Kit is the perfect and economical solution for the everyday woodworker with a smaller to midsize workshop. Once installed on a barrel, box, or any container (barrel or box not included), this dust and debris separator keeps the larger, heavier chips coming from you machinery from getting into your dust collector impeller. This will ad years to the life of your dust collector and help keep your bag emptying chores to a minimum. This keeps the large debris from slamming into your dust collector’s impeller or filling up your shop vacuums container to quickly. This also helps prevents any unnecessary damage to dust collector impellers. This means you can use the cyclone separator with your planer, jointer or router tables without having to empty the bag or vacuum containers nearly as often. The 4” Separator Cyclone kit comes with 2 ea. 4 in feed elbow ports (for bottom side of separator) 1 ea. hardware pack and 2 ea. easy to secure 4 turn key hose clamps. Hose, barrel or container are NOT included.